Bobcat S300 W4321 Error Code
W4321 Error Code
"Manbasket mode : Remote control not connected to Manbasket harness (from GACDcontroller status)" is the main cause of W4321 error.The condenser converts gases into liquids, which expels heat from your rig. Materials can build up over time, causing a layer of dirt and grime to form on the condenser's coils. Your AC system will only blow hot air since the refrigerant fails to cool down.
Tip For S300 Model
When the temperature is below -30 C (-20 F), hydrostatic oil must be warmed before starting. The hydrostatic system will not get enough oil at low temperatures and will be damaged. Park the machine in an area where the temperature will be above -18 C (0 F) if possible.