Bobcat S300 U1027 Error Code
U1027 Error Code
Nox Pre-Treatment CAN communication Fault is the main cause of U1027 error.The condenser converts gases into liquids, which expels heat from your rig. Materials can build up over time, causing a layer of dirt and grime to form on the condenser's coils. Your AC system will only blow hot air since the refrigerant fails to cool down.
Tip For S300 Model
If the engine stops, the boom / bucket
(attachments) can be lowered to the ground
using hydraulic pressure in the accumulator.
The control console must be in the locked
down position, and the key switch in the ON
position.
Use the control lever to lower the boom.